Setup

Security Door

Advanced Roleplay Security System featuring original mesh, animated handles, and a dual-code authentication system.

Quick Start Guide

Follow these four steps to get your door installed, coded, and ready for residents.

1. Install

Rez the door and move it into your doorframe. You can Resize it to fit, but DO NOT UNLINK any parts or the scripts will break.

2. Set PIN

Click the Keypad > Admin > Access > Set Code. Enter a 4-digit PIN. This is the manual backup code for entry.

3. Config Cards

Edit the Linked Keypad prim. Open the CONFIG notecard inside and set a password. Copy this password to the CONFIG inside your Keycards.

4. Permissions

Go to Admin > Mode. Toggle between Open (anyone), Group (active tag), or Locked (Keycard/PIN only).

Security Note: This is a Roleplay Security Door. Second Life allows users to "Cam" through objects. For 100% parcel security, pair this with the StudioOne Security System.

Hardware & Interaction

Door Components

Primary Interactions

Handle: Click to attempt entry. It will animate and flash RED if access is denied.

Door Face: Click the main door to "Knock." A notification will appear in local chat identifying which door is being knocked on.

Admin Button: Located on the keypad. Use this to access the main management menu.

Quick-Release Button

Install this on the inside of your room. It allows anyone to exit immediately without a code.

Note: It uses a distance check; users cannot "cam" from the outside to press it.

Permissions

Access Matrix

Toggled via the Mode button in the Admin menu. Use this chart to understand who can enter in each state:

Access Permissions Table

The Two-Code System

1. Keypad Code

Set in: Admin Menu > Access > Set Code.

This is the 4-digit number users physically type into the door's numpad to unlock it.

2. Keycard Config

Set in: CONFIG notecard inside the Keypad prim and the Access Card.

This "Password" allows users wearing a Lanyard/Keycard to enter automatically by clicking the handle.

Configuring Access Cards

  1. Right-click the door > Edit > Edit Linked.
  2. Select the Keypad Prim.
  3. Open the CONFIG notecard in the contents and set your password.
  4. Repeat this for the CONFIG notecard inside your Access Card/Lanyard.
Keycard Notecard Configuration

Managing Lists & Whitelists

All management lists (Managers, Whitelist, Blacklist) use a standard interface:

  • ADD Paste an avatar UUID into the text box.
  • REMOVE Use the paginated menu to select a user.
  • LIST Prints the list to local chat with clickable profile links.
  • CLEAR Wipes the entire list immediately.

Owner Safeguard: The owner is always a manager and cannot be removed or blacklisted.

Customization & Modding

DO NOT:

  • Unlink: Unlinking components will break the scripts.
  • Phantom: Do not set the door prim to phantom manually; the script handles this during the opening animation.

YOU CAN:

  • Resize: Scale the door to fit your frame.
  • Retexture: Apply your own 2K textures or tints.
  • Reposition: Move the handles or keypad within the linkset.